|
Industrial Triplex Plunger Pumps
|
AR pumps are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands.
|
|
XT Series Pumps
|
 |
Plunger Pumps are designed for a wide variety of moderate pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form impervious to water absorption provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze at higher pressures, oversized for strength and load disbursement.
Flows: 0.5 to 4 GPM Pressure to: 2200 PSI Speeds: 1450, 1750, 3400 rpm
Shaft Styles: Solid Shaft 24mm, Hollow Shaft 5/8" and 3/4"
Click here for more details |
|
XM / SXM Series Pumps
|
 |
Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by eletric motor or gasoline driven systems, gasoline engine driven systems.
Flows: 2.9 to 4 GPM Pressure to: 3500 PSI Speeds: 1450, 1750, 3400 rpm
Shaft Styles: Solid Shaft 24mm, 3/4", Hollow Shaft 5/8", 3/4" 1", 1-1/8", Tapered
Click here for more details |
|
RK Series Pumps
|
 |
Plunger Pumps are designed for a wide variety of high pressure washing applications. They are constructed of die-cast bodies and feature a forged brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. One-piece connecting rods are either a special alloy aluminum or bronze oversized for strength and load disbursement. These pumps are designed for gearbox , belt drive, or coupling drive systems, electric motor 182-184 frame driven systems, or gasoline engine driven systems.
Flows: 3.5 to 7.1 GPM Pressure to: 4000 PSI Speeds: 1450, 1750, 3400 rpm
Shaft Styles: Solid Shaft 24mm, Hollow Shaft 5/8", 1", 1-1/8", Tapered
Click here for more details |
|
|
|
 |
new pump frame ideal for long life belt drive pressure washers. The RW big bodied industrial pump has been engineered to run 20 percent lower rpm. Featuring new state of the art low pressure seals that are impregnated with Teflon and graphite, super thick ceramic plungers, super size 32 oz oil crankcase, over-sized tapered bearings for maximum life and load disbursement, double sight glasses, double oil drain plugs and special long life Ultra-form valve cage body that is impervious to absorption and deformation. Two models available RW21 1450 rpm 5.5 gpm @ 3,500 psi and RW15 1450 rpm 4 gpm @ 3,500 psi. The RW runs quietly and efficiently, ideal for long erm pressure washing and contract cleaning.
Flows: 4 to 5.5 GPM Pressure to: 3500 PSI Speeds: 1450 rpm
Shaft Styles: Solid Shaft 24mm
Click here for more details |
|
|
XW Series Pumps
|
 |
Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material oversized for strength and load disbursement. These pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft.
Flows: 3.96 to 13 GPM Pressure to: 4350 PSI Speeds: 500, 1000, 1450, 1750 rpm
Shaft Styles: Solid Shaft 24mm
Click here for more details |
|
SXW Series Pumps
|
|
Plunger Pumps are designed for high-pressure industrial washing applications. They are constructed of die-cast bodies and feature a forged brass head with a bayonet style sight glass in the rear and side covers. Internal components include special solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are a special alloy aluminum-based material oversized for strength and load disbursement. These pumps are designed for gearbox, belt drive, or flex coupled systems, with a 24mm solid crankshaft.
Flows: 3.96 to 7 GPM Pressure to: 5100 PSI Speeds: 1450, 1750 rpm
Shaft Styles: Solid Shaft 24mm
Click here for more details |
|
SHP Series Pumps
|
 |
Plunger Pumps are designed with a new high efficincy brass pantented manifold. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized premium SKF tapered roller bearings and the precision die-cast supports assure proper shaft alignment and maximum life. Valve cages of Ultra-Form provide positive seating and extended life, especially designed for high pressure applications. Two-piece connecting rods are a special alloy aluminum-based material oversized for maximum strength and load disbursement. These pumps are designed for gearbox flex coupled or belt drive systems with a 24mm solid crankshaft.
Flows: 3.96 to 5.8 GPM Pressure to: 7250 PSI Speeds: 1450 rpm
Shaft Styles: Solid Shaft 24mm
Click here for more details |
|
|
|
|
